9166 Waterseal Mastic

Number:    9266
BriefDescription:   
● Antenna connector waterproof
● RRU connector waterproof
● Ground wire waterproof
● Applicable in Macro stations and special scenes.
 
Application

● Antenna connector waterproof
● RRU connector waterproof
● Ground wire waterproof
● Applicable in Macro  stations and special scenes.

 
Color Available

 
Dimensions

 

 

W×T×L:63mm × 3.18mm × 0.6m

 
Description

9166 Water-seal mastic has an excellent adhesive property, waterproof moisture resistance, excellent high and low temperature resistance, as well as alkali, acid, salt, chemical corrosion etc. Even in cold climates, 9166 waterproof cement can remain active and can retain its strong waterproof sealing property. It can also retain the wire insulation tape and other outsourcing without any side effects. 9166 Water-seal mastic is highly conformable. It can be used for communication equipment base station, antenna, feeder and other indoor waterproof seal joint. It can also be used for moisture sealing, insulation in power cables and sinking wires through 600V. For optimal performance, use 9166 with COTRAN PVC tape.

 

 

 

 

Directions for use

1.Clean, dust and grease the cable connector regularly.
2. Remove the separator from tape. Make sure the tape has adhesive on it during connections.
3. Exceed 30mm-50mm joint fore and aft part when wrapped.
4. for optimal performance, use it with COTRAN PVC tape.

 
Properties

No.

Performance

Typical Value

Test Method

1

Temperature Range

-40℃ - 55℃


2

Operating Temperature

0℃ - 32℃

ASTM D 4325

3

Water Absorption

< 0.05%

ASTM D 570

4

Volume Resistance

1014ΩNaN

ASTM D 4325

5

Cold Endurance

-70℃ 168H 

ASTM G 154-2

6

Ozone Resistance

Pass

ASTM D 570

7

UV Resistance

Pass

ASTM D 4325